View MX6SWT-A1-0000-000CE7_4947308.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Cree(R) XLamp(R) MX-6S LEDs
Data Sheet
The Cree XLamp reliability of Cree of the MX-family secondary optics, MX-6S LED provides the proven lighting-class performance and XLamp LEDs in a high voltage, PLCC configuration. All members of LEDs have wide viewing angle, uniform light output without unlimited floor life, and electrically neutral thermal path.
The XLamp MX-6S LED brings high performance and quality of light to a range of lighting applications that require near-line-voltage configuration, including LED light bulbs, fluorescent retrofits and retail-display lighting.
FEATURES * * * * * * * Available in white (2,600 K to 8,300 K CCT) Wide viewing angle: 120 20 VDC nominal with voltage binning available Electrically neutral thermal path Qualification at max drive current RoHS-compliant Unlimited floor life at 30C/85% RH
Table of Contents
Flux Characteristics (TJ = 25C)................................................................................................................. 2 Characteristics ........................................................................................................................................ 2 Relative Spectral Power Distribution ........................................................................................................... 3 Relative Flux vs. Junction Temperature (IF = 65 mA) .................................................................................... 3 Electrical Characteristics (TJ = 25C) .......................................................................................................... 4 Relative Flux vs. Current (TJ = 25C) ......................................................................................................... 4 Thermal Design ....................................................................................................................................... 5 Typical Spatial Distribution ........................................................................................................................ 5 Reflow Soldering Characteristics ................................................................................................................ 6 Notes ..................................................................................................................................................... 7 Mechanical Dimensions (TA = 25C) ........................................................................................................... 8 Tape and Reel ......................................................................................................................................... 9 Packaging ............................................................................................................................................. 10
ev 1 CLD-DS31 R Data Sheet:
Subject to change without notice. www.cree.com/xlamp
1
Flux Characteristics (TJ = 25C)
The following table provides several base order codes for XLamp MX-6S LEDs. It is important to note that the base order codes listed here are a subset of the total available order codes for the product family. For more order codes, as well as a complete description of the order-code nomenclature, please consult the XLamp MX Family LED Binning and Labeling document.
Color
CCT Range Min. Max.
Base Order Codes Min Luminous Flux (lm) @ 60 mA Group R3 Flux (lm) 122 130 114 122 100 107 93.9 100 107 114 100 107
Order Code
MX6SWT-A1-0000-000F51 MX6SWT-A1-0000-000G51 MX6SWT-A1-0000-000EE3 MX6SWT-A1-0000-000FE3 MX6SWT-H1-0000-000CE5 MX6SWT-H1-0000-000DE5 MX6SWT-H1-0000-000BE7 MX6SWT-H1-0000-000CE7 MX6SWT-A1-0000-000DE5 MX6SWT-A1-0000-000EE5 MX6SWT-A1-0000-000CE7 MX6SWT-A1-0000-000DE7
Cool White
5,000 K
8,300 K
R4 R2 R3 Q4
80-CRI White
2,600K
4,300K
Q5 Q3 Q4
3,700 K Warm White 2,600 K
4,300 K
Q5 R2 Q4 Q5
3,700 K
Notes: * Cree maintains a tolerance of 7% on flux and power measurements and 2 on CRI measurements. * Typical CRI for Cool White (4,300 K - 8,300 K CCT) is 75. * Typical CRI for Warm White (2,600 K - 4,300 K CCT) is 80. * Minimum CRI for 80-CRI White is 80.
Characteristics
Characteristics Thermal resistance, junction to solder point Viewing angle (FWHM) Temperature coefficient of voltage ESD classification (HBM per Mil-Std-883D) DC forward current Forward voltage (@ 60 mA) LED junction temperature mA V C 20.0 Unit C/W degrees mV/C Minimum Typical 5 120 -20 Class 2 175 22.0 150 Maximum
Copyright (c) 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com/xlamp
2
CLD-DS31 Rev 1
Relative Spectral Power
Relative Spectral Power Distribution
120
Relative Radiant Power (%)
100
80
5000K - 8300K CCT 3500K - 5000K CCT
60
2600K - 3500K CCT
40
20
0 400 450 500 550 600 650 700 750
Wavelength (nm)
Relative Flux vs. Junction Temperature (IF = 60 mA)
Relative Flux Output vs. Junction Temperature
100%
90%
Relative Luminous Flux
80%
70% 60% 50%
40% 30%
20% 10% 0% 25 50 75 100 125 150
Junction Temperature (C)
Copyright (c) 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com/xlamp
3
CLD-DS31 Rev 1
Electrical Characteristics (Tj = 25C) Electrical Characteristics (T = 25C)
J
175
150
Forward Current (mA)
125
100
75
50
25
0 15.00 16.00 17.00 18.00 19.00 20.00 21.00 22.00 23.00 24.00
Forward Voltage (V)
Relative Intensity vs. Current (Tj = 25C)
Relative Flux vs. Current (TJ = 25C)
250
Relative Luminous Flux (%)
200
150
100
50
0 0 25 50 75 100 125 150 175
Forward Current (mA)
Copyright (c) 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com/xlamp
4
CLD-DS31 Rev 1
Thermal Design
Thermal Design The maximum forward current is determined by the thermal resistance between the LED junction and ambient. It is
200 180 160 140 120
100 80 60 40 20 0 0 25 50 75 100 125 150
crucial for the end product to be designed in a manner that minimizes the thermal resistance from the solder point to ambient in order to optimize lamp life and optical characteristics.
Maximum Current (mA)
Rj-a Rj-a Rj-a Rj-a
= = = =
10C/W 15C/W 20C/W 25C/W
Typical Spatial Radiation Pattern
Typical Spatial Distribution
Ambient Temperature (C)
120
Relative Luminous Intensity (%)
100
80
60
40
20
0 -100 -80 -60 -40 -20 0 20 40 60 80 100
Angle ()
Copyright (c) 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com/xlamp
5
CLD-DS31 Rev 1
Reflow Soldering Characteristics
In testing, Cree has found XLamp MX-6S LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed below. As a general guideline, Cree recommends that users follow the recommended soldering profile provided by the manufacturer of solder paste used. Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment.
Profile Feature Average Ramp-Up Rate (Tsmax to Tp) Preheat: Temperature Min (Tsmin) Preheat: Temperature Max (Tsmax) Preheat: Time (tsmin to tsmax) Time Maintained Above: Temperature (TL) Time Maintained Above: Time (tL) Peak/Classification Temperature (Tp) Time Within 5C of Actual Peak Temperature (tp) Ramp-Down Rate Time 25C to Peak Temperature
Lead-Based Solder 3C/second max. 100C 150C 60-120 seconds 183C 60-150 seconds 215C 10-30 seconds 6C/second max. 6 minutes max.
Lead-Free Solder 3C/second max. 150C 200C 60-180 seconds 217C 60-150 seconds 260C 20-40 seconds 6C/second max 8 minutes max.
Note: All temperatures refer to topside of the package, measured on the package body surface.
Copyright (c) 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com/xlamp
6
CLD-DS31 Rev 1
Notes
Lumen Maintenance Projections Based on internal long-term reliability testing, Cree projects XLamp MX-6S LEDs will maintain an average of 70% or higher lumen maintenance after 35,000 hours, provided the LED is operated with a constant current of not more than 100 mA and ambient air temperature around the LED is maintained at or below 85C. Please read the XLamp Long-Term Lumen Maintenance application note for more details on Cree's lumen maintenance testing and forecasting. Please read the XLamp Thermal Management application note for details on how thermal design, ambient temperature and drive current affect the LED junction temperature. Moisture Sensitivity In testing, Cree has found XLamp MX-6S LEDs to have unlimited floor life in conditions 30C / 85% relative humidity (RH). Moisture testing included a 168 hour soak at 85C / 85% RH followed by 3 reflow cycles, with visual and electrical inspections at each stage. RoHS Compliance The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/ EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended through April 21, 2006. Vision Advisory Claim Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye.
Copyright (c) 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com/xlamp
7
CLD-DS31 Rev 1
Mechanical Dimensions (TA = 25C)
All measurements are .13 mm unless otherwise indicated.
Top View
Top View
Bottom View
Side View
Recommended FR4 Solder Pad
Recommended MCPCB Solder Pad
Alternative Solder Pad
Copyright (c) 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com/xlamp
8
CLD-DS31 Rev 1
4.0.1 1.75.10 8.0.1
1.5.1
2.5.1 Cathode Side
Tape and Reel
+.3 12.0 .0
All dimensions in mm.
END
Anode Side User Feed Direction (denoted by + and circle) END
START User Feed Direction
START
Trailer 160mm (min) of empty pockets sealed with tape (20 pockets min.)
Loaded Pockets (1,000 Lamps)
Leader 400mm (min) of empty pockets with at least 100mm sealed by tape (50 empty pockets min.) User Feed Direction
Cover Tape
Pocket Tape
13mm 7"
Copyright (c) 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com/xlamp
9
CLD-DS31 Rev 1
Packaging
Dessicant Desiccant (inside bag) (inside bag) Humidity Indicator Humidity Indicator Card (inside bag) (inside bag)
All dimensions in mm.
Vacuum-Sealed Vacuum-Sealed Moisture Barrier Bag Moisture Barrier Bag Vacuum-Sealed Vacuum-Sealed Moisture Barrier Bag Moisture Barrier Bag
Label with Cree Bin CREE Bin Code & Barcode Label # Code, Qty, Lot Label with CREE Bin Code Cree Bin & Barcode Label Code, Qty, Lot #
Labelwith CustomerBin Label with Cree P/N, Qty, Lot Lot # Code, Qty, #, PO # Label with Cree Bin Label with Customer P/N, Qty, Lot #, PO Code, Qty, Lot# #
Patent Label Patent Label Label with Customer Order Code, Qty, Reel ID, PO # Label with Customer Order Code, Qty, Reel ID, PO #
Label with Customer Order Code, Qty, Reel ID, PO#
Label with Cree Bin Code, Qty, Lot #
Copyright (c) 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com/xlamp
10
CLD-DS31 Rev 1

▲Up To Search▲

Price & Availability of MX6SWT-A1-0000-000CE7

	To Download MX6SWT-A1-0000-000CE7 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .